Repair For Component Part: Mainshaft: Assembly

WARNING: This page is about a different variant/trim than selected.

Press mainshaft front bearing onto mainshaft.
- Pay special attention to its direction.
  
  Fig 1: Pressing Mainshaft Front Bearing Onto Mainshaft
  Courtesy of NISSAN MOTOR CO., U.S.A.
Select snap ring with proper thickness.
Allowable clearance between snap ring and groove: 0 - 0.15 mm (0 - 0.059 in)

Available snap ring for mainshaft front bearing: Refer to " MAINSHAFT FRONT BEARING " .
For further procedures, refer to "ASSEMBLY " .

Fig 2: Installing Snap Ring
Courtesy of NISSAN MOTOR CO., U.S.A.