LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2002 >> Altima Base, 2.5 A, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle >> On-Vehicle Service >> Revolution Sensor Replacement

Revolution Sensor Replacement

  1. Disconnect electrical connector.
  2. Remove revolution sensor from A/T.
  3. Reinstall any part removed.
    • Always use new sealing parts  .
      Fig 1: Removing Revolution Sensor From A/T
      G01982489Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals