LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2001 >> Quest SE >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics >> Self-Diagnostic System >> System Readiness Test >> Setting SRT Codes

Setting SRT Codes

To set all SRT codes as complete, drive vehicle according to procedure shown in illustration. See Fig 1. Perform driving procedure one or more times. If driving procedure is interrupted, repeat procedure. Operate vehicle with shift lever in "D" position and overdrive turned on.

Fig 1: Setting System Readiness Test (SRT) Codes
G98C01294Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals