LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2000 >> Sentra XE, Standard >> Repair and Diagnosis >> Engine Mechanical >> Starters - BOSCH >> Bench Testing >> Starter No-Load Test

Starter No-Load Test

Connect starter in series with a 12-volt battery and bench tester (with 1000-amp ammeter). Operate starter. If amperage exceeds maximum specification or if RPM is less than minimum specification, repair or replace starter. See STARTER NO-LOAD TEST SPECIFICATIONS  table.

STARTER NO-LOAD TEST SPECIFICATIONS

Maximum Amps Minimum RPM
90 3500
scientia non olet · About LEMON Manuals