Idle Speed Control
PCM controls engine idle speed according to engine operating conditions and component/model application. PCM will send a signal to adjust and compensate for idle speed under the following conditions: from starting to 20 seconds after start, low battery voltage, engine overheating, electrical load, A/C on, power steering load, during deceleration and when vehicle is moving at idle.
Idle speed control is achieved using various components. Models are equipped as follows:
- All Except Sentra 2.0L & 200SX 2.0L & 240SX IAC Valve, IACV-FICD, Fast Idle Cam
- Sentra 2.0L & 200SX 2.0L & 240SX IAC Valve, IACV-Air Regulator, IACV-FICD