LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 1996 >> Sentra Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Bleeding Brake System >> BRAKELINE Bleeding

BRAKELINE Bleeding

  1. Carefully monitor brake fluid level at master cylinder during bleeding operation. Fill reservoir with DOT 3 brake fluid. Ensure reservoir is full at all times while bleeding air out of system. Turn ignition off. Disconnect negative battery cable. Bleed brakes in sequence: right rear, left front, left rear and right front.
  2. Connect a transparent vinyl tube to air bleeder valve. Fully depress brake pedal several times. With brake pedal depressed, open bleeder valve to release air. Close bleeder valve. Release brake pedal slowly. Repeat procedure until clear brake fluid comes out of bleeder valve.
scientia non olet · About LEMON Manuals