LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 1994 >> Quest XE >> Repair and Diagnosis >> Engine Performance >> Engine Controls - Adjustments >> Ignition Timing >> V6 Ignition Timing

V6 Ignition Timing

  1. Ensure engine is at normal operating temperature. Turn ignition off. Disconnect IACV-AAC valve harness connector. Start engine. Increase engine speed to 2000 RPM, 2 or 3 times, then allow engine to return to idle.
  2. Check ignition timing. See V6 IGNITION TIMING table. See Fig 1 . If ignition timing is incorrect, loosen hold-down bolt and turn distributor to adjust ignition timing.
V6 IGNITION TIMING (Degrees BTDC @ RPM)

Application Man. Trans. (1) Auto. Trans.
Quest 13-17 @ 700-800 13-17 @ 700-800
(1) Automatic transmission/transaxle in Neutral.
Fig 1: Locating Ignition Timing Marks (V6 Except 300ZX)
G93C78313Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals