Door Lock & Unlock Switch
Leave all connectors together. Check continuity between Green/Orange wire and ground, and between Green/Yellow wire and ground at keyless entry control module. See LOCK & UNLOCK CONTINUITY CHECK table. Repair any open or shorted circuits. If all circuits are okay, replace door lock and unlock switch.
LOCK & UNLOCK CONTINUITY CHECK
| Lock Switch Position | (1) Continuity Between | |||
|---|---|---|---|---|
| Drivers Side | ||||
| Lock | Green/Yellow & Ground | |||
| Unlock | Green/Orange & Ground | |||
| Passenger Side | ||||
| Lock | Green/Yellow & Ground | |||
| Unlock | Green/Orange & Ground | |||
|
||||