Bleeding Brake System

Bleed ABS in same way as conventional system using appropriate bleeding sequence. See HYDRAULIC LINE BLEEDING SEQUENCE table. After bleeding brakes, bleed front side of actuator and then rear side of actuator. Use DOT 3 brake fluid only.

HYDRAULIC LINE BLEEDING SEQUENCE

Application

⁽¹⁾ Sequence

300ZX

⁽²⁾ LR, RR, LF, RF

⁽¹⁾	Turn ignition off. Disconnect negative battery cable and actuator connector.

⁽²⁾	After calipers are bled, bleed front, then rear side of actuator.