LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 1994 >> 240SX Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Air Induction Systems >> Swirl Control Valve >> Control Solenoid

Control Solenoid

  1. Disconnect vacuum lines and electrical connector from solenoid, located near flywheel end of cylinder head. Remove solenoid. Apply vacuum to port "B" of solenoid. See Figure . Vacuum should now be available at port "C", but not at port "A".
  2. Apply battery voltage across solenoid connector terminals. Vacuum should now be available at port "A", but not at port "C". Replace solenoid if it does not operate as specified.
scientia non olet · About LEMON Manuals