LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 1993 >> Sentra SE-R, Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls - Basic Testing >> Ignition Checks >> DISTRIBUTORLESS Ignition (EI) System >> Ignition Coil Resistance

Ignition Coil Resistance

Disconnect ignition coil connector. Check primary resistance between terminals "B" and "C" of ignition coil connector. See Fig 1. Resistance should be about 0.75 ohm. If resistance is not as specified, replace ignition coil.

Fig 1: Identifying Ignition Coil Terminals
G50A16857Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals