LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 1993 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul - Re4F03V >> Component Disassembly & Reassembly >> Band Servo Piston Assembly >> Reassembly

Band Servo Piston Assembly: Reassembly

  1. Apply ATF to all "D" rings and "O" rings prior to installation. Install "D" rings on servo piston retainer. Install band servo piston stem, band servo thrust washer, OD servo return spring and spring retainer on band servo piston. Place piston stem on wooden block. While pushing servo piston spring retainer down, install "E" ring.
  2. Install "O" rings on servo piston retainer. Install band servo piston assembly into servo piston retainer by pushing inward. Install "D" ring on OD band servo piston. Install "O" rings on OD servo piston retainer.
  3. Install OD band servo piston to OD servo piston retainer. Install band servo piston assembly and 2nd servo return spring in transaxle case. Install OD band servo piston assembly to transaxle case. Install band servo piston snap ring on transaxle case. See Figure.
scientia non olet · About LEMON Manuals