LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 1993 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Ignition Systems >> Power Transistor >> Altima, NX, Sentra, Pathfinder, Pickup, Quest & 240SX

Altima, NX, Sentra, Pathfinder, Pickup, Quest & 240SX

  1. Disconnect power transistor connector. See Figure -Figure . At power transistor connector, check continuity between the following terminals, noting ohmmeter test lead polarity:
    • "a" (+) and "b" (-).
    • "a" (+) and "c" (-).
  2. If there is continuity, replace power transistor. If there is no continuity, reverse ohmmeter test lead polarity and check continuity across terminals listed in previous step. If there is no continuity, replace power transistor. If there is continuity, power transistor is okay.
scientia non olet · About LEMON Manuals