Removal & Installation: Actuator: Removal
- Disconnect battery negative cable. Drain brake fluid from bleeder at each caliper. Drain power steering fluid. Discharge A/C system using approved refrigerant recovery/recycling equipment. Disconnect power steering pipe and hose.
- Disconnect electrical connectors from actuator relay bracket. Remove relay bracket nut. Remove mounting bolt located under relay. Remove actuator relay box and bracket. Disconnect A/C hoses.
- Disconnect upper 2 brakelines from actuator (lines from master cylinder). Remove 2 brakelines between actuator and proportioning valve. Remove actuator mounting nuts and grounding bolt. Remove actuator.