LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 1991 >> Sentra SE-R >> Repair and Diagnosis >> Steering >> Power Steering >> Steering System - Power >> Overhaul >> Power Steering Pump >> Reassembly

Power Steering Pump: Reassembly

  1. Install new oil seal, "O" rings and gasket. Coat "O" rings with ATF before installation. Rotor should be installed with punch mark located on face of rotor toward housing side of pump. Install vanes with flat side toward rotor.
  2. Install cam ring in alignment with pins. Ensure cam ring properly seats on both pins. To complete installation, reverse removal procedure. Tighten nuts and bolts to specification. See appropriate TORQUE SPECIFICATIONS TABLE  at end of article.
scientia non olet · About LEMON Manuals