LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 1990 >> 300ZX Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/O Codes >> Engine Stall >> Hot

Engine Stall: Hot

  1. Remove vacuum hose from fuel pressure regulator and monitor for symptom change.
  2. Ensure engine has adequate compression.
  3. Perform appropriate test in INJECTOR MALFUNCTION diagnostic chart in SYSTEM/COMP TESTS article. Use DIAGNOSTIC CHARTS DIRECTORY table in SYSTEM/COMP TESTS article to locate chart.
  4. Check for spark using spark tester.
  5. Ensure fuel pressure is within specification.
  6. Check ECU harness connector.
  7. Check ECU power source and ground circuit. See ECU POWER SOURCE & GROUND diagnostic chart in SYSTEM/COMP TESTS article. Use DIAGNOSTIC CHARTS DIRECTORY table in SYSTEM/COMP TESTS article to locate chart.
  8. Try a known good ECU.
  9. Check timing belt for proper installation.
scientia non olet · About LEMON Manuals