LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 1987 >> Sentra Base >> Repair and Diagnosis (Single Page) >> Electrical >> Starter - HITACHI >> Bench Testing >> Commutator

Bench Testing: Commutator

  1. Inspect commutator for roughness, grooves, burns or pitting. Sand lightly with 500-600 grit sandpaper if necessary. Check commutator for out-of-round and mica insulators undercut to a depth of .020-.031" (.50-.80 mm).
  2. If necessary, commutator may be turned less than .04" (1.0 mm) from original size and mica undercut. Replace if excessively worn.
scientia non olet · About LEMON Manuals