Operating Circuit Test
Disconnect connector at control unit. Connect terminals with jumper cable and check each operation. For correct results see the OPERATING CIRCUIT TEST table below.
OPERATING CIRCUIT TEST
| Connect Between Terminals | Correct Results | |
|---|---|---|
| 15 & 10 | Keypad illumination comes on. | |
| 14 & 10 | Electronic buzzer sounds. | |
| 6 & 10 | Driver's door is unlocked. | |
| 16 & 10 | Doors except driver's are locked. | |
| 8 & 10 | ||
| Sedan | Trunk lid is open. | |
| Wagon | Back Door is unlocked. | |
| 7 & 10 | All doors are locked. | |