LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 1985 >> 300ZX GL, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (EFI Control System) >> Component Testing >> Starter Switch (Code 32)

Starter Switch (Code 32)

WARNING: This page is about a different car, the 1985 Nissan Stanza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect 20-pin connector and measure the voltage between 9 and 5 (body ground). See Figure . Turn ignition switch to "START" position. If battery voltage is present, replace control unit.
  2. If there is no battery voltage, check harness and repair if necessary. If okay, check starting circuit and replace or repair if necessary. If okay, replace or charge battery.
scientia non olet · About LEMON Manuals