Engine Mechanical: Starter: Overhaul: Reassembly

To reassemble, reverse disassembly procedure. Fill gear case on reduction gear models with grease. Lightly oil pinion and all bearing surfaces. Refer to Fig 1 through Fig 4 .

Fig 1: Exploded View of Typical Hitachi Conventional Starter

Fig 2: Measuring Pinion Edge-to-Pinion Stopper Clearance

Fig 3: Exploded View of Typical Hitachi Reduction Gear Starter For Datsun/Nissan Maxima with Gasoline Engine

Fig 4: Exploded View of Typical Mitsubishi Conventional Starter