Steering Column: Reassembly
Install new "O" ring. Slide column shaft into column tube, from bottom. Install washer and snap ring. Make sure column shaft rotates easily in column tube.
TIGHTENING SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | ||
|---|---|---|---|
| Joint Shaft-to-Column Bolt | |||
| 310 Upper and Lower | 17-22 (23-30) | ||
| Sentra Upper and Lower | 22-29 (30-39) | ||
| Stanza | |||
| Upper | 27-38 (37-52) | ||
| Lower | 23-31 (31-42) | ||
| Maxima | |||
| Lower | 24-28 (33-38) | ||
| Rubber Coupling-to-Worm Shaft | |||
| 200SX, 210 | 29-36 (39-49) | ||
| Steering Column Clamp Bolts | |||
| 200SX, 210, Maxima | 9-13 (12-18) | ||
| 310, Sentra, Stanza | 7-10 (10-14) | ||
| Steering Wheel Nut | |||
| 200SX, 210, Stanza, Maxima | 27-38 (37-52) | ||
| 310 | 22-25 (30-34) | ||
| Sentra | 22-29 (30-39) | ||