All Models: Removal
- Remove horn button and steering wheel nut. Pull steering wheel from shaft. Detach steering column covers and remove combination lighting switch assembly. On 610 models, remove package tray. Turn ignition switch to "GARAGE" position. If equipped with Auto. Trans. shift on column, remove cotter pin and separate shift rod.
Courtesy of NISSAN NORTH AMERICA, INC.
- Disconnect steering column from lower joint shaft at rubber coupling. Unbolt steering post clamp just above bellowed section of column. Unscrew four bolts retaining steering column grommet to floor board. Pull steering column up into passenger compartment, leaving lower shaft in engine compartment.