LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2025 >> Outlander PHEV SEL >> Repair and Diagnosis >> Brakes >> Brakes Control Systems >> Brake Control System (5 Of 6) >> DTC/Circuit Diagnosis >> Brake Warning Lamp >> Component Function Check

Component Function Check

  1. CHECK BRAKE WARNING LIGHT FUNCTION (1) 

    Check that brake warning light in combination meter turns ON for approximately 1 second after electric motor switch is ON (before engine start).

    Is the inspection result normal? 

    YES: GO TO  2.

    NO: Refer to DIAGNOSIS PROCEDURE .

  2. CHECK BRAKE WARNING LIGHT FUNCTION (2) 

    Check that brake warning light in combination meter turns ON/OFF when brake fluid level switch is operated while brake fluid level in reservoir tank is with the specified level.

    NOTE: Brake warning light turns ON when brake fluid is less than the specified level (when brake fluid level switch is ON).

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Check the brake fluid level switch system. Refer to DIAGNOSIS PROCEDURE .

scientia non olet · About LEMON Manuals