LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2025 >> Outlander PHEV ES >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Transaxle >> Electrical Parking Driver Unit >> On-Vehicle Service >> Check Initial Learning Quantity >> Procedure

Check Initial Learning Quantity: Procedure

  1. Confirm that the power supply mode of the electric motor switch is OFF, and connect the scan tool (M.U.T.-III SE).
  2. Turn the power supply mode of the electric motor switch to ON (READY indicator: OFF).
  3. Confirm that the value of data list item No. 180: "Movement Range Learned Value" is within the standard value.

    Standard value: 319 - 516 

    • If the value is larger than the standard value, replace the front transaxle assembly.
    • If the value is smaller than the standard value, carry out the troubleshooting for DTC No. P1C43-96: Encoder Failure.
scientia non olet · About LEMON Manuals