Removal And Installation: Notes

Fig 1: Removing/Installing Balancer Chain Components Location With Torque Specification

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Removal steps
<<A >>	>>E <<	1.	Drive plate bolt
		2.	Adapter plate
		3.	Drive plate
	>>D <<	4.	Rear oil seal
<<B >>	>>C <<	5.	Balancer shaft chain tensioner
		6.	Balancer shaft tensioner lever
		7.	Balancer shaft chain guide
<<B >>	>>B <<	8.	Balancer shaft module
<<B >>	>>B <<	9.	Balancer chain
<<B >>	>>B <<	10.	Crankshaft sprocket
<<C >>	>>A <<	11.	Ladder frame

Required Special Tool :