Work Procedure

NOTE: If the electric shift control module has been replaced, start with step 2.

ERASE SHIFT ACTUATOR LEARNING VALUE
With M.U.T.-III SE
1. Turn ignition switch ON.
2. Select "WORK SUPPORT" in "SHIFT".
3. Select "ACTUATOR LEARNING VALUE ELIMINATION" of "Learned value clear".
4. Touch "OK".
>>

GO TO 2.
SHIFT ACTUATOR LEARNING
1. Turn ignition switch ON.
2. Depress the brake pedal in "P" position and wait for 3 seconds.
3. Start the engine.
4. Depress the brake pedal.
5. Shift to "D" position and wait for 3 seconds.
6. Press the P position switch.
7. Turn ignition switch OFF and wait for 60 seconds.
>>

WORK END