Work Procedure

PERFORM CALIBRATION OF DECEL G SENSOR [ABS actuator and electric unit (control unit)]
Perform calibration of decel G sensor. Refer to DESCRIPTION .

>>

GO TO 2.
PREPARATION BEFORE CALIBRATION PROCEDURE
1. Park the vehicle on a level surface.
2. Adjust air pressure of all tires to the specified pressure. Refer to TIRE AIR PRESSURE .
>>

GO TO 3.
PERFORM CALIBRATION OF DECEL G SENSOR (TCM)
With M.U.T.-III SE
1. The ignition switch is ON.
  CAUTION: Never start engine.
2. Select "Special Function" in "TRANSMISSION".
3. Select "G SENSOR CALIBRATION" of "G sensor calibration".
4. Touch "OK".
  CAUTION: Never rock or jounce the vehicle during "G sensor calibration".
Is "COMPLETED" displayed?

YES >>

WORK END

NO >>

Perform steps 3 again.