Component Function Check

WARNING: This page is about a different car, the 2023 Mitsubishi Outlander PHEV. However, it is still accessible from the selected car via links, so may be relevant.

CHECK REAR WINDOW DEFOGGER FUNCTION
With M.U.T.-III SE
1. Turn the power supply mode of the electric motor switch to ON.
2. Select "BCM" with M.U.T.-III SE.
3. Select "Rear defogger" in "Actuator Test" (in "Special Function") mode.
4. Touch "ON".
5. Check that the back door window glass is getting warmer.
  NOTE: When glass is hot, never start inspection until it is cool enough.
Is the inspection result normal?

YES >>

Rear window defogger function is normal.

NO >>

Refer to DIAGNOSIS PROCEDURE .