Component Function Check

WARNING: This page is about a different car, the 2023 Mitsubishi Outlander PHEV. However, it is still accessible from the selected car via links, so may be relevant.

CHECK DOOR MIRROR DEFOGGER (DRIVER SIDE) FUNCTION
With M.U.T.-III SE
1. Turn the power supply mode of the electric motor switch to ON.
2. Select "BCM" with M.U.T.-III SE.
3. Select "Rear defogger" in "Actuator Test" (in "Special Function") mode.
4. Touch "ON".
5. Check that the driver side door mirror glass is getting warmer.
  NOTE: When glass is hot, never start inspection until it is cool enough.
Is the inspection result normal?

YES >>

Door mirror defogger (driver side) function is normal.

NO >>

Refer to DIAGNOSIS PROCEDURE .