Work Procedure

When replacing ADAS control unit 2, it is necessary to write MAC key to ADAS control unit 2. Write MAC key to ADAS control unit 2 according to "MAC Key writing" procedure of "M.U.T.-III SE Operation Manual".

CAUTION: During MAC key writing, maintain the following conditions:

Ignition switch ON
M.U.T.-III SE is connected to internet

PERFORM MAC KEY WRITING
1. Ignition switch ON.
2. Select "MAC Key writing" on "Special Function" of "ACC/ADAS 2" using M.U.T.-III SE.
3. Touch "OK".
  >>
  
  WORK END