Precautions For Harness Repair

WARNING: This page is about a different car, the 2024 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

CAN communication uses a twisted pair line. Be careful when repairing it.

Solder the repaired area and wrap tape around the soldered area.

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

NOTE: A fray of twisted lines must be within 110 mm (4.33 in).
Bypass connection is never allowed at the repaired area.

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

NOTE: Bypass connection may cause CAN communication error. The spliced wire becomes separated and the characteristics of twisted line are lost.