Fail-Safe Control By DTC
WARNING: This page is about a different car, the 2024 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
BCM performs fail-safe control when any DTC are detected.
| Display contents of M.U.T.-III SE | Fail-safe |
|---|---|
| B2C95-01: Combination switch | Turns ON the headlight (LO) |
| B2C95-64: Combination switch | Turns ON the headlight (LO) |
| B2C96-49: Light sensor | Turns ON the headlight (LO) |
| B2CB5-64: Rear wiper | Stop rear wiper power supply for 1min |
| B2FAE-12: Ignition relay-1 | Inhibit engine cranking |
| B2FAE-14: Ignition relay-1 | Inhibit engine cranking |