Component Function Check

CHECK FUNCTION

Select "HOOD SW (CAN)" or "Hood switch" in "Data List" mode of "IPDM E/R" using scan tool (M.U.T.-III SE).
Check "HOOD SW (CAN)" or "Hood switch" indication under the following condition.

Monitor item	Condition	Indication
HOOD SW (CAN)	Close the hood	Close
	Open the hood	Open
	Transmits invalid CAN signal	NG
Hood switch	Close the hood	Close
Hood switch	Open the hood	Open

Is the indication normal?

YES >>

Hood switch is OK.

NO >>

Refer to DIAGNOSIS PROCEDURE .