DTC Confirmation Procedure

If DTC Confirmation Procedure has been previously conducted, always perform the following procedure before conducting the next test.

TESTING CONDITION:

Check that "COOLANT TEMP/S" indicates between 0°C to 30°C (30°F to 86°F) before conducting following procedure.

GO TO 2 

Perform Component Function Check. Refer to COMPONENT FUNCTION CHECK .

Is the inspection result normal? 

YES-1 >>

To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .

YES-2 >>

Confirmation after repair:

GO TO 3 

NO >>

Refer to DTC DIAGNOSIS PROCEDURE .

Erase DTC of ECM.

>>

INSPECTION END