Power tool
 Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
|
Loosening nuts and bolts |
Heated oxygen sensor thread cleaner
 Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
|
Reconditioning the exhaust system threads before installing a new heated oxygen sensor (Use with anti-seize lubricant shown below.)
- J-43897-18 [18 mm (0.71 in) dia.] for zirconia heated oxygen sensor
- J-43897-12 [12 mm (0.47 in) dia.] for titania heated oxygen sensor
- Mating surface shave cylinder
- Flutes
|
Anti-seize lubricant (Permatex 133AR or equivalent meeting MIL specification MIL-A-907)
 Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
|
Lubricating heated oxygen sensor thread cleaner when reconditioning exhaust system threads |