LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2022 >> Outlander SE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Engine Cooling System) >> Removal And Installation >> Thermostat >> Exploded View

Exploded View

WARNING: This page is about a different car, the 2024 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Thermostat Components Location With Torque Specification
G16070986Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
(1) Water pump housing
(2) Water pump housing gasket
(3) Rubber ring
(4) Thermostat 
(5) Water inlet
(6) Clamp
(7) Water hose 
(8) Water pipe
(A) Comply with the assembly procedure when tightening  . Refer to REMOVAL AND INSTALLATION .
(B) To radiator hose (lower). Refer to EXPLODED VIEW 
(C) To CVT water hose A. Refer to EXPLODED VIEW
(D) To EGR cooler. Refer to EXPLODED VIEW
(E) To reservoir tank
: Always replace after every disassembly  .
: N.m (kg-m, ft-lb)