LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2022 >> Outlander ES, AWD >> Repair and Diagnosis >> General Information >> OEM General Information >> Basic Inspection >> Service Information For Electrical Incident >> Circuit Inspection >> Case 2

Case 2

G16052557Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
INPUT-OUTPUT VOLTAGE SPECIFICATION

Terminal No. Description Condition Value (Approx.) In case of high resistance such as single strand (V) (2)
+ - Signal name Input/Output
1 Body ground Light Output Switch ON 0 V Battery voltage (Inoperative light)
Switch OFF Battery voltage Battery voltage
2 Body ground Switch Input Switch ON 0 V Higher than 0 Approx. 4 (Example)
Switch OFF 5 V Approx. 5
(1) 1. The voltage value is based on the body ground.

(2) If high resistance exists in the switch side circuit (caused by a single strand), terminal 2 does not detect approx. 0 V. Control unit does not detect the switch is ON even if the switch does not turn ON. Therefore, the control unit does not control ground to light up the light.
scientia non olet · About LEMON Manuals