Inspection of the (+) diode
- Check the electrical continuity of the points shown in the table below. Confirm that there is not electrical continuity. If there is, replace the generator assembly.
| Measured terminal No. Tester: (+) side - (-) side | Continuity |
|---|---|
| B terminal - 1 | Continuity exists. |
| B terminal - 2 | |
| B terminal - 3 | |
| B terminal - 4 | |
| B terminal - 5 | |
| B terminal - 6 | |
| 1 - B terminal | No continuity |
| 2 - B terminal | |
| 3 - B terminal | |
| 4 - B terminal | |
| 5 - B terminal | |
| 6 - B terminal |