LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2021 >> RVR LE >> Repair and Diagnosis >> Body & Frame >> Mirrors >> Outside Mirror >> Special Tools

Special Tools

Tool Tool number and name Supersession Application
G12119412Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 MB991958
  1. MB991824
  2. MB991827
  3. MB991910
  4. MB991911
  5. MB991914
  6. MB991825
  7. MB991826

Scan tool (M.U.T.-III sub assembly)
  1. Vehicle communication interface (V.C.I.)
  2. M.U.T.-III USB cable
  3. M.U.T.-III main harness A (Vehicles with CAN communication system)
  4. M.U.T-III main harness B (Vehicles without CAN communication system)
  5. M.U.T-III main harness C (for Daimler Chrysler models only)
  6. M.U.T.-III measurement adapter
  7. M.U.T-III trigger harness
 MB991824-KIT
NOTE: G: MB991826 M.U.T.-III Trigger Harness is not necessary when pushing V.C.I. ENTER key.
  
CAUTION: For vehicles with CAN communication, use the M.U.T.-III main harness A to send simulated vehicle speed. If you connect the M.U.T.-III main harness B instead, the CAN communication does not function correctly.

Check the vehicle speed-dependent automatic unfolding function of the outside rear-view mirrors
G09625236Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 MB991223 Harness set
  1. MB991219 Test harness
  2. MB991220 LED harness
  3. MB991221 LED harness adapter
  4. MB991222 Probe
 General service tools Continuity check and voltage measurement at harness wire or connector
  1. For checking connector pin contact pressure
  2. For checking power supply circuit
  3. For checking power supply circuit
  4. For connecting a locally sourced tester
G08294095Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 MB992006
Extra fine probe		 - Continuity check and voltage measurement at harness wire or connector
scientia non olet · About LEMON Manuals