Data List Reference Table
CAUTION:
- Driving tests always need two persons: one driver and one observer.
- When shifting the selector lever to "D" range apply the brakes should be applied so that the vehicle does not move forward.
| Scan tool display | Item number | Inspection item | Inspection requirement | Normal condition | |
|---|---|---|---|---|---|
| Brake light switch | 74 | Stoplight switch (for stoplight circuit) | Ignition switch: "ON" | Brake pedal: Depressed | ON |
| Brake pedal: Released | OFF | ||||
| Cancel code | 57 | Cancel code | Ignition switch: "ON" | The cancel code, which set when the cruise control system was cancelled at the last time. | |
| Cancel switch | 75 | Cruise control switch ("CANCEL" switch) | Ignition switch: "ON" | "CANCEL" switch: Pressed | ON |
| "CANCEL" switch: Released | OFF | ||||
| Cruise switch | 81 | Cruise control system operation | Cruise control system: active | ON | |
| Cruise control system: Inactive | OFF | ||||
| Main switch | 86 | Cruise control switch ("CRUISE ON/OFF" switch) | Ignition switch: "ON" | "CRUISE ON/OFF" switch: Pressed | ON |
| "CRUISE ON/OFF" switch: Pressed again | OFF | ||||
| Neutral switch | 88 | Transmission range switch | Ignition switch: "ON" | Selector lever: "N" or "P" position | ON |
| Selector lever: Other than "N" or "P" position | OFF | ||||
| Normally closed brake switch | 89 | Stoplight switch (for Cruise control circuit) | Ignition switch: "ON" | Brake pedal: Depressed | ON |
| Brake pedal: Released | OFF | ||||
| Resume switch | 91 | Cruise control switch ("RES+" switch) | Ignition switch: "ON" | "RES+" switch: Pressed | ON |
| "RES+" switch: Released | OFF | ||||
| Set switch | 92 | Cruise control switch ("SET-" switch) | Ignition switch: "ON" | "SET-" switch: Pressed | ON |
| "SET-" switch: Released | OFF | ||||
| Vehicle speed | 04 | Vehicle speed signal | Road test the vehicle | The speedometer and scan tool MB991958 display the same value. | |