Hub Bolt Replacement

Required Special Tools: 

• MB991618: Hub Bolt Remover
• MB990767: Front Hub and Flange Yoke Holder

1. Remove the brake caliper assembly and brake disc, and retain the brake caliper assembly with a wire and the like to prevent from falling (Refer to BRAKE CALIPER ASSEMBLY REMOVAL  ).
2. Use special tool MB991618 to remove the hub bolts.

   Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

3. Install the plain washer to the new hub bolt, and install the bolt with a nut while holding the hub with special tool MB990767.
4. Install the brake disc and the brake caliper assembly (Refer to FRONT AXLE HUB ASSEMBLY  ).

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.