Data List Reference Table
VEHICLES WITH KEYLESS OPERATION SYSTEM AND ONE-TOUCH START SYSTEM DESCRIPTION
| Item No. | Check item | Check condition | Normal condition | ||
|---|---|---|---|---|---|
| 1* | Received F.A.S.T.-key data (ID) | - | Memorized keyless operation key ID | ||
| 2 | Received F.A.S.T.-key (button) | - | Switch display of the keyless operation key | ||
| 3 | Driver's door lock/unlock SW | Driver's door lock/unlock switch: ON | ON | ||
| Driver's door lock/unlock switch: OFF | OFF | ||||
| 5(1) | Passenger's door lock/unlock SW | - | ON | ||
| OFF | |||||
| 7 | Gate (LOCK/UNLOCK)/Trunk OPEN SW | Liftgate lock/unlock switch: ON | ON | ||
| Liftgate lock/unlock switch: OFF | OFF | ||||
| 14 | Memorized F.A.S.T.-keys | - | Number of the keyless operation keys memorized | ||
| 15 | Memorized emergency F.A.S.T.-keys | - | Number of the spare keys memorized | ||
| 20 | Engine switch (1) | When the engine switch is pressed | ON | ||
| When the engine switch is not pressed | OFF | ||||
| 21 | Engine switch (2) | When the engine switch is pressed | ON | ||
| When the engine switch is not pressed | OFF | ||||
| 22 | Stoplight switch | When the brake pedal is depressed | ON | ||
| When the brake pedal is released | OFF | ||||
| 23 | Clutch monitoring switch | - | Not relevant for service | ||
| 24 | P range detect SW | Shift the selector lever to the position other than the "P" position. | Outside park | ||
| Shift the selector lever to the "P" position. | Park | ||||
| 25 | IG1 output (monitor) | Power supply mode is turned ON or the engine is being started by the pressing of engine switch. | ON | ||
| Other than above | OFF | ||||
| 26 | IG2 output (monitor) | Power supply mode is turned ON. | ON | ||
| Other than above | OFF | ||||
| 27 | OSS power supply status | Power supply mode is abnormal. | Default or SNA | ||
| Power supply mode is OFF. | IG OFF | ||||
| Power supply mode is ACC. | IG ACC | ||||
| Power supply mode is ON. | IG ON | ||||
| Ignition switch: "ON" | IG START | ||||
| Ignition switch: "ON" | IG RUN (judging) | ||||
| 28 | +B1 Power supply voltage (AD) | Always | System voltage | ||
| 29 | +B2 Power supply voltage (AD) | Always | System voltage | ||
|
NOTE:
|
|||||