- Remove the seal rings from the side cover.
 Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
|
CAUTION:
Ensure that the special tool MB992196 is correctly set, directly above the return springs of the spring retainer assembly.
- Using the special tool MB992196, remove the snap ring while pushing the spring retainer assembly.
 Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
|
CAUTION:
Do not remove the return springs from the spring retainer assembly.
- Remove the spring retainer assembly from the 2-6 brake piston.
 Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
|
CAUTION:
Do not feed air abruptly. Otherwise, the 2-6 brake piston may become stuck in the side cover.
- Feed air through the oil hole as indicated in the illustration to remove the 2-6 brake piston from the side cover.
 Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
|
- Remove the D-rings from the 2-6 reverse brake piston.
 Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
|