LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2020 >> Outlander SE, FWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Overhaul >> Side Cover >> Disassembly And Assembly >> Disassembly >> Assembly

Disassembly And Assembly: Disassembly: Assembly

CAUTION:
  • Never reuse the D-rings.
  • Apply transmission fluid to the D-rings before installation.
  1. Install D-rings onto the 2-6 brake piston.
    G05432009Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    CAUTION: Apply transmission fluid to the 2-6 brake piston before installation.
  2. Install the 2-6 brake piston onto the side cover.
    G05432011Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. Install the spring retainer assembly onto the 2-6 brake piston.
    G05432007Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    CAUTION: Ensure that the special tool MB992196 is correctly set, directly above the return springs of the spring retainer assembly.
  4. Using the special tool MB992196, install the snap ring while pushing the spring retainer assembly.
    G05432006Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    CAUTION:
    • Never reuse the seal rings.
    • Apply Vaseline to the seal rings before installation.
  5. Install seal rings onto the side cover.
    G05432005Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals