LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2020 >> Mirage G4 LE >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Supply >> On-Vehicle Service >> Fuel Tank Temperature Sensor Check

Fuel Tank Temperature Sensor Check

  1. Remove the rear seat cushion assembly (Refer to REAR SEAT ASSEMBLY ).
  2. Remove the inspection lid.
    G09628695
  3. Disconnect the fuel pump module connector.
    G09628734
  4. Measure the resistance between connector terminals No. 1 and No. 3 of the fuel pump module (incorporating fuel tank temperature sensor).

    Standard value: 0.43 - 12.3 kΩ 9at -10 - 70°C (14 - 158°F)) 

  5. If not within the standard value, replace the fuel level sensor and fuel tank temperature sensor (Refer to DISASSEMBLY AND ASSEMBLY ).
  6. Connect the fuel pump module connector.
  7. Install the inspection lid.
  8. Install the rear seat cushion assembly (Refer to REAR SEAT ASSEMBLY ).
    G09628745
scientia non olet · About LEMON Manuals