LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2019 >> RVR ES, Automatic CVT Trans >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System >> Generator Assembly >> Inspection >> Brush

Generator Assembly: Inspection: Brush

  1. Measure the length of the protrusion of the brush. Replace the brush if the protrusion length is shorter than the limit.

    Limit: 2 mm (0.1 inch) minimum 

  2. Unsolder the lead of the brush. The brush will come out, becoming ready for removal.
    G05393725Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. Install a new brush by pushing it into the holder as shown in the drawing and soldering the lead.
G05393726Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals