Brake Disc Thickness Check
WARNING: This page is about a different car, the 2018 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
- Remove contaminants or corrosion from the brake disc surface.
- Use a micrometer to measure the brake disc thickness at minimum eight points which are 10 mm (0.39 inch) inward from its circumference.
Standard value:
- 26.0 mm (1.02 inch) <Front>
- 10. mm (0.39 inch) <Rear>
Limit:
- 24.4 mm (0.96 inch) <Front>
- 8.4 mm (0.33 inch) <Rear>
- If the brake disc thickness is worn beyond the limit value at more than one point, replace the brake disc and check its run-out.