LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2019 >> Outlander LE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 185 (2.0L Fuel System) >> Fuel Injection, Gas >> Sensor, TMAP-Intake Manifold >> Removal

Sensor, TMAP-Intake Manifold: Removal

WARNING: This page is about a different car, the 2020 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the engine covers. Refer to COVER, ENGINE, REMOVAL .
  3. Remove OBD vent valve. Refer to SOLENOID, EVAPORATIVE EMISSIONS PURGE, REMOVAL .
    GC0181460Courtesy of CHRYSLER GROUP, LLC
  4. Disconnect the Temperature/Manifold Air Pressure (TMAP) wire harness connector (1).
  5. Remove the screw (2) and remove the TMAP sensor (3) complete with O-ring.
scientia non olet · About LEMON Manuals