LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2019 >> Outlander LE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 185 (2.0L Fuel System) >> Fuel Delivery, Gas >> Module, Fuel Pump, Control >> Removal

Module, Fuel Pump, Control: Removal

WARNING: This page is about a different car, the 2020 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the passenger side quarter trim panel. Refer to PANEL, QUARTER TRIM, REMOVAL .
    GC0187138Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the wire harness connector (1) from the Fuel Pump Control Module (FPCM).
  4. Remove the two mounting nuts (2) and remove the FPCM from the vehicle.
scientia non olet · About LEMON Manuals