LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2019 >> Outlander LE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (Fuel Supply System) >> On-Vehicle Service >> Leveling Valve Check

Leveling Valve Check

WARNING: This page is about a different car, the 2018 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place a drain pan, and disconnect the leveling hose at fuel filler neck side (Refer to REMOVAL AND INSTALLATION <FWD> , REMOVAL AND INSTALLATION <AWD> ).
    NOTE: If fuel leaks from the leveling hose at this stage, the leveling valve may be defective.
  2. Open the fuel filler cap, and fill the fuel tank up.
  3. If fuel does not leak from the leveling hose with the fuel tank full, the leveling valve is normal. If not so, the leveling valve may be defective. Replace the fuel tank (Refer to DISASSEMBLY AND ASSEMBLY <FWD> , DISASSEMBLY AND ASSEMBLY <AWD> ).
  4. Reconnect the leveling hose at the fuel filler neck side.
scientia non olet · About LEMON Manuals